[Mar 27, 2026] Lesson Brilliant PDF for the VCS-284 Tests Free Updated Today [Q110-Q135]

Share

[Mar 27, 2026] Lesson Brilliant PDF for the VCS-284 Tests Free Updated Today

Get New 2026 Valid Practice Veritas NetBackup VCS-284 Q&A - Testing Engine

NEW QUESTION # 110
An administrator is configuring a remote client over a high latency WAN network. Which setting should be modified to improve the performance of the first backup using client deduplication?
Response:

  • A. Use Accelerator in the policy
  • B. WAN Resiliency on the client
  • C. WAN Optimization on the Media Server
  • D. FP_CACHE_CLIENT_POLICY in pd.conf on the client

Answer: D


NEW QUESTION # 111
An administrator is preparing to perform disaster recovery for many clients whose backups are stored on multiplexed tapes. Which host property should the administrator modify, prior to the restores, to ensure the best recovery time?
Response:

  • A. add the client IP addresses to Resilient Network
  • B. increase Restore retries
  • C. increase Delay on multiplexed restores
  • D. set Enable unrestricted media sharing for all media servers

Answer: D


NEW QUESTION # 112
Which two options are available to an administrator to bring the Media Server Deduplication Pool (MSDP) catalog back online in the case of a hardware problem that caused corruption?
(Select two.)
Response:

  • A. repair the MSDP catalog using the crchk tool
  • B. recover the MSDP catalog from a MSDP catalog backup
  • C. repair the MSDP catalog using the recoverCR tool
  • D. restore the MSDP catalog from the NetBackup catalog backup
  • E. restore the MSDP catalog from an MSDP catalog shadow copy

Answer: B,E


NEW QUESTION # 113
The following storage lifecycle policy was used to back up data from a client.
Storage Lifecycle Policy
Backup to AdvancedDisk
Duplication to tape
Duplication to AdvancedDisk
How should an administrator restore data from the tape using NetBackup?
Response:

  • A. from the NetBackup Administration console, promote copy 1 to the primary copy
  • B. From the BAR GUI, select the tape backup to restore from
  • C. from the NetBackup Administration console, promote copy 2 to the primary copy
  • D. use bpduplicate command to promote copy 1 to the primary copy

Answer: A


NEW QUESTION # 114
In which scenario is ''Use Accelerator" unavailable in a backup policy?
Response:

  • A. for an Exchange database availability group (DAG).
  • B. for VMware virtual machines with a Linux guest OS.
  • C. for virtual machines hosted on a Hyper-V Host using WMI.
  • D. for a NetApp NDMP filer.

Answer: C


NEW QUESTION # 115
Which two NetBackup features are available to protect the Media Server Deduplication Pool (MSDP) catalog?
(Select two.)
Response:

  • A. MSDP shadow copies
  • B. Optimized Catalog Duplication
  • C. NetBackup catalog backups
  • D. Checkpoints
  • E. MSDP catalog policy

Answer: A,E


NEW QUESTION # 116
An administrator is comparing the NetBackup Accelerator and NetBack up FlashBackup features to determine which feature should be used for backup of a very large file system with millions of files.
Which consideration is irrelevant when determining whether to use NetBackup Accelerator or Net Back up FlashUackup in the situation?
Response:

  • A. the file system folder depth
  • B. the file system storage capacity
  • C. the file system change rate
  • D. the type of file system being used

Answer: C


NEW QUESTION # 117
The administrator has a master server running over 50,000 jobs per day. What can the administrator do to reduce the load on the master server?
Response:

  • A. add additional media servers to the environment
  • B. configure client-side deduplication and load balancing media servers
  • C. replicate the backups to another master server domain
  • D. configure a new master server to distribute the backup load

Answer: D


NEW QUESTION # 118
A backup image on tape is due to expire in one week. The administrator needs to keep the image available for restore indefinitely. Which two methods can be used to accomplish this goal?
(Select two.)
Response:

  • A. use the bpexpdate command to change the expiration date of the image
  • B. use the bpimmedia command to freeze the tape
  • C. use the bpduplicate command to create a copy with an infinite retention
  • D. use the bpretlevel command to customize the retention level
  • E. use the vmchange command to change the expiration date of the tape

Answer: B,E


NEW QUESTION # 119
An administrator is experiencing a backup failure, which may be due to lack of connection between the media and master server. The status of the media server is shown below: Media server showing offline Which command can the administrator run to change the status of the media server?
Response:

  • A. nbdb_admin
  • B. bptestbpcd
  • C. nbemmcmd
  • D. bpminlicense

Answer: B


NEW QUESTION # 120
An administrator is experiencing a communication issue between the master and client and believes the certificate might be revoked. Which log can the administrator view to analyze a certificate issue?
Response:

  • A. nbemm
  • B. bprd
  • C. nbrb
  • D. vnetd

Answer: A


NEW QUESTION # 121
Which interface is pre-configured with the 192.168.229.233 IP address?
Response:

  • A. bond0
  • B. eth0
  • C. eth1
  • D. IPMI

Answer: C


NEW QUESTION # 122
A NetBackup policy is configured to back up the following paths for a client: D:\stage E:\data E:\home F:\production Multistreaming is enabled for the backups, and multiplexing is set to 4. Backup streams are running slowly.
Which step should the administrator consider to improve backup performance?
Response:

  • A. increase the number of data buffers
  • B. disable multistreaming
  • C. increase the multiplexing level
  • D. back up only one stream from each physical device on the client

Answer: D


NEW QUESTION # 123
Prior to initiating a restore, an administrator realizes that media needed for the restore was written by a server that is unavailable. The administrator does have another server that can perform the restore and that is connected to the same library.
Which two commands can the administrator perform to change the server ownership, so the restore can be performed?
Response:

  • A. bpimagelist
  • B. bpimmedia
  • C. bpmedia
  • D. bpimage
  • E. bpimport

Answer: C,D


NEW QUESTION # 124
Which command is used by VxUpdate to upgrade clients?
Response:

  • A. nbhostmgmt
  • B. nbinstallcmd
  • C. vmupdate
  • D. nbrepo

Answer: A


NEW QUESTION # 125
An administrator is creating a Standard policy with the option ''Use Accelerator'' to back up files on a Linux server. Which two options are disabled by default in this type of policy?
Response:

  • A. Allow multiple data streams
  • B. Collect true image restore information
  • C. Compress
  • D. Encrypt
  • E. Cross mount points

Answer: C,D


NEW QUESTION # 126
Which type of backup schedules are available when using the After each backup session schedule type for an NBU- Catalog policy type?
Response:

  • A. Application Backup
  • B. Differential Incremental
  • C. Vault Catalog Backup
  • D. Full

Answer: C


NEW QUESTION # 127
The NetBackup Resource Broker (NBRB) maintains resource requests for jobs that are queued. Which two criteria does NBRB use to evaluate the resource requests and provide resources to each job sequentially?
(Select two.)
Response:

  • A. retention level
  • B. job priority
  • C. time when NBRB receives the request
  • D. data classification rank ID
  • E. date of last successful backup

Answer: B,C


NEW QUESTION # 128
Which type of backup can be performed from a client machine by a user or script?
Response:

  • A. Automatic scheduled
  • B. Manual
  • C. User-directed
  • D. Immediate

Answer: C


NEW QUESTION # 129
Where are the NetBackup track logs located by default when backing up a NetApp filer using the NDMP policy type with NetBackup Accelerator enabled?
Response:

  • A. on a user defined network share
  • B. on the NetBackup master and media server
  • C. on a NetBackup client
  • D. on the NetApp filer

Answer: D


NEW QUESTION # 130
Which steps should an administrator perform to run an upgrade pre-check for multiple Windows and Linux clients using VxUpdate, without performing the upgrade?
Response:

  • A. configure the pre-check to run for all clients concurrently in Deployment Policies > Attributes
  • B. run a pre-check for each client manually using the nbinstallcmd command
  • C. configure the pre-check to run for all clients concurrently in Deployment Policies > Schedules
  • D. run a pre-check for each client manually using the nbrepo command

Answer: A


NEW QUESTION # 131
To reduce network use by limiting the number of parallel backup streams, which cloud setting should be modified under the Scalable Storage host property?
Response:

  • A. Metering > Metering interval
  • B. Throttling > Total available bandwidth
  • C. Throttling > Sampling interval
  • D. Network Connections > Maximum concurrent jobs

Answer: A


NEW QUESTION # 132
In which two areas of NetBackup 7.7 is multiplexing configured?
(Select two.)
Response:

  • A. storage unit configuration
  • B. global attributes
  • C. schedules attributes
  • D. media server host properties
  • E. policy attributes

Answer: D,E


NEW QUESTION # 133
Auto Image Replication is being used to replicate New York backups to London. The New York backups have completed. What is the next step?
Response:

  • A. images are replicated to London using a storage lifecycle policy to a disk staging storage unit
  • B. images are replicated to London using a storage lifecycle policy to an AdvancedDisk type storage unit
  • C. images are replicated to London using a storage lifecycle policy to an NDMP storage unit
  • D. images are replicated to London using a storage lifecycle policy to a Media Server Deduplication Pool

Answer: D


NEW QUESTION # 134
A disk pool is a.
Response:

  • A. None of the above
  • B. Collection of disk volumes presented as a single entity
  • C. Disk enclosure
  • D. Logical grouping of media servers

Answer: A


NEW QUESTION # 135
......

VCS-284 Dumps PDF - 100% Passing Guarantee: https://gcgapremium.pass4leader.com/Veritas/VCS-284-exam.html